Flash PS3Key with Teensy Hex

Edited by: modrobert

How to erase the bootloader and flash PS3Key with any Teensy 1.0 hex file.

NOTE: Once you've updated the PS3Key with the Teensy hex, you can never use the PS3Key update program again.

Install the Atmel FLIP program.
Insert your PS3Key in bootloader mode which can be achieved by shorting the RESET pin on the Atmel ATMEGA32U2 chip to GROUND as seen here.
Windows will detect the new hardware as AVR Key (AVR DFU Bootloader) and you have to install the drivers manually, you will find them in the directory where you installed the Flip Atmel (Example: C / Program Files / Atmel / Flip 3.4.2/usb).
Run the Atmel Flip, and go to to device and select ATMEGA32U2.
Go to Settings> Communication, and click on Open USB.
Trough the file menu; open the Teensy 1.0 hex file you want to use.
Leave all options enabled and start the erasing and programming.
It will erase the PS3Key bootloader, and put the Teensy 1.0 hex file on it.

Now when a new hex file is released by Hermes or KaKaRoTo you never have to wait anymore for the PS3Key team for their update.

This page has been accessed 3,357 times. This page was last modified 09:55, 12 November 2010.