PspDumpingFirmwareHowTo

Chossy @ http://www.maxconsole.net/?mode=news&newsid6352

We first need to download the relevant tools.

1)MPH Firmware loader V1.4

2)Firmware V2.00 & V2.5 eboots.

Once we have these we can proceed to installing and dumping the firmware.

Extract the firmware loader and install to PSP/GAME on your MS.

Extract the V2.00 eboot and place in root of your MS.

Create a new folder in root of MS called Firmware.

Run the MPH firmware loader & select Launch/Install A Firmware/Automatically (with an eboot.pbp).

On the automatic installation screen press up on the dpad so choose is highlighted on pbp file & select it.

On the choose file screen press up on the dpad then scroll down to the eboot.pbp & select it.

Do the same with the install folder option selecting the firmware folder we just created.

Leave the Copy Flash1 option set on Yes.

Once we have done this select Install and wait for it to dump the firmware.

When you see the MS led stop flashing and The Firmware Has Been Successfully Dumped press OK.

Exit the MPH firmware loader and goto the usb option on your PSP.

Create a new folder on you PC called firmware then one inside of that called V2.00 & V2.50.

Copy the flash0 & flash1 folder from your PSP MS firmware folder to the v2.00 folder on your PC.

Delete the flash0 & flash1 folders form your MS & repeat the whole process again the the V2.50 eboot.

You now have 2 complete dumps of the V2.00 & V2.50 firmwares.

To create a hybrid firmware create a new folder on your PC in the firmwares folder called hybrid.

Copy the v2.00 Flash0 folder to it & rename it to Flash2.

Replace flash2/kd folder with 2.50 flash0/kd folder.

DO NOT REPLACE RESOURCE FOLDER INSIDE KD FOLDER..use 2.00 resource folder.

Then replace the flash2vshmodule folder with the one from 2.50 dump.

Then copy the v2.50 Flash1 folder to it & rename Flash3.

Bingo all done.

This page has been accessed 607 times. This page was last modified 08:46, 17 February 2010.