Updating ecliPS3 with PSGroove Hermes

by modrobert

1) Download and unpack the latest Eclipse Firmware manager which can be found here.

2) Download and unpack the latest PSGroove Hermes which can be found here.

3) Start the Eclipse Firmware manager (aka Eclipse Updater) and select "LOAD PSGROOVE FIRMWARE" as seen below.

4) Select a proper hex file from the PSGroove Hermes archive you unpacked and click "Open", actually any hex from there will do but lets pick one for 16MHz crystal just in case.

5) You should get the "Successfully imported file" message at the lower part of the screen as seen below. Now, click the "START" button.

6) If everything went well you should see this.

Retrieved from "http://www.eurasia.nu/wiki/index.php/Updating_ecliPS3_with_PSGroove_Hermes"

This page has been accessed 3,997 times. This page was last modified 03:44, 7 October 2010.