![[Main Page]](http://www.eurasia.nu/images/svico_t.gif)
Tutorial written by : cityson
Disclaimer: I will not hold responsibility for anything that might happen to your Xbox, opening it will void the manufacturers warranty. All actions you followed in this tutorial are done so at your own risk buddy.
Install Diagram:
Tool needed: - Torx 10 Screwdriver. (To open the Xbox case and unscrew a screw on the mobo.)
Instructions: - Unplug power cord. - Take out HDD + DVD drive. - Unclip the stock fan using a screwdriver...(You know where the clips are...) - Take a look at the fan's plug. Use a needle to pinch out the black wire. - Ground the black wire under a screw on the mobo. as shown.
- Leave the red wire the way it is though. (You see the red wire is always plugged in.)
P.S. MAKE SURE THE BLACK WIRE'S TIP IS TOUCHING THE SILVER PART UNDER THE SCREW! FAIL TO DO SO WILL MAKE YOUR XBOX RESTART FREQUENTLY DURING THE NEXT BOOTUP
Thats all, thank you for reading this. Hope it helps.
If your xbox frequently freeze (deadlock) after a certain time, especially when watching dvd movie, this fix helps. Your xbox will stay cool. ;)