Xbox360DvdDriveAdapter

WunSick @ http://devo-e.com/dvdhax/?p=13

The following diagram has been made purely to make it as simple as possible for beginners and advanced users alike.

(Special thanks to JohnnyTk26 for drawing up the diagram)

Full Diagram: [1]

Adapter Pinout
[[X]]  [[8]]  [[6]]  [[4]]  [[2]]  [[0]]
[[X]]  [[9]]  [[7]]  [[5]]  [[3]]  [[1]]

X = Dead Pins

Full Parts List: - Capacitors - .o1 micro Farads (symbol looks like .01 uF)

  any small value should work, it is just used to filter AC out of the line so a "true earth" ground is achieved

- Voltage regualtor- 1086V33

- Small wire andything around the 20-22 gauge should work

- A small StripBoard

- Some small heatshrink might come in handy.

- You will need a power connector from a orginal xbox, or you can make your own. The connector pin spacing on the power connector is 2mm.

Thanks guys!!

This page has been accessed 1,660 times. This page was last modified 19:02, 14 February 2010.